Yuasa new
Precautions for installation and charging of new YUASA battery
Precautions for installation and charging of new yuasa battery
Some newly installed batteries have large differential pressure, which will affect their use?
After floating charge operation for a certain period of time, the floating charge voltage of the newly installed battery will tend to be uniform, because the saturation of sulfuric acid just used is high, the gas recombination efficiency is poor, the saturation will slightly drop after operation, and the floating charge voltage of the shallow battery will also be uniform.
How to judge the backward battery when it is floating charged?
The terminal voltage of the backward battery is low when discharging, so the backward battery should be measured in the discharge state. If the terminal voltage is the lowest in three consecutive discharge cycles, it can be judged as the backward battery in this group. If there is a backward battery, it should be charged evenly. For example, for the battery in floating charge state, if the floating charge voltage is lower than 2.16v, attention should be paid.
In the long-term floating charge operation of tangshallow battery, what are the reasons why the voltage of tangshallow battery is not available?
At present, there is a phenomenon of uneven floating charge voltage in the battery, which is caused by the accumulation of errors in the quality, quantity and content of the accessories and materials used in the production of the battery. Especially, the battery adopts the lean liquid design, the error will affect the sulfuric acid saturation inside the battery, which directly affects the recombination of oxygen during floating charge of the battery, so as to make the storage during floating charge The floating charge voltage of the battery is different when the over potential of the battery is different. But after a certain period of floating charge operation, the floating charge voltage will tend to be uniform. Because of the poor oxygen recombination efficiency of the battery with high sulfuric acid saturation, the saturation decreases slightly, and the floating voltage of the battery tends to be even.
In addition, the voltage drop of the connecting strip in series is large, the contact between the pole and the connecting strip is poor, and the new battery may be uneven within 3-6 months of operation.