How about the quality of YUASA battery products?

The quality of YUASA batteries is closely related to the characteristics of Panasonic batteries

1. yasaq battery function:

(1) Long service life

High strength and compact assembly technology is adopted to improve the sealing of battery components, prevent active substances from falling off, and improve the service life of batteries.

The battery charging acceptance and deep discharge cycle ability can be improved by using low acid specific electro-hydraulic technology

It is designed to be more acid-resistant to ensure that the battery life is not shortened by electrolyte depletion. So 6GFM series

The normal service life of the battery can reach 6 - 10 years (25 C).

(2) Low self-discharge

With high purity raw materials and special manufacturing process, self-discharge is very small, and can be charged free of charge if stored at room temperature for more than six months.

(3) Simple maintenance

A special oxygen absorption cycle design was adopted to overcome the loss of electrolytic water during battery charging.

The water content of EDLC has hardly changed. Therefore, batteries need not be supplemented during use. It's easy to maintain.

(4) High security

Batteries are equipped with special safety valves, which can effectively isolate external sparks and will not cause internal explosion of batteries.

(5) High cleanliness

When using batteries, there will be no acid fog, no corrosion to the surrounding environment and supporting equipment. Batteries can be installed directly in the office.

Room or auxiliary equipment room. No anticorrosive treatment is required.

2. Safety valve is one of the key components of Tangshao battery, located at the top of the battery. It plays a role in four aspects:

(1) Safety function, that is, when the battery pressure generated during the use of the battery reaches the pressure of the safety valve, open the valve to release the pressure to prevent the generation.

(2) Sealing function: When the internal pressure of the battery is lower than the closing pressure of the valve of the safety valve, close the safety valve to prevent internal fog leakage, prevent air from entering the Panasonic battery and cause adverse effects.

(3) Ensure the normal internal pressure of maintenance-free lead-acid batteries, promote oxygen mixing in batteries and reduce water loss.

(4) Explosion-proof, some safety valves are equipped with acid-proof explosion-proof film.

In addition, there are many types of safety valve structures, such as hats, umbrellas and sheets. Usually a hat made of rubber is used and has better elasticity. It has simple structure, low failure rate and wide application.

Tangshao Battery Factory has strict production regulations and strict production attitude. It will produce high quality Tangshao Battery。