What is the quality of 12V100AH for the lead-acid battery

What is the quality of 12V100AH for the lead-acid battery

The soup storage battery is composed of positive plate and negative plate, separator and electrolyte, battery unit and connecting bar (or lead part), connecting terminal and exhaust valve.

First, the components of the shallow storage battery

1. the shallow battery panel is the central component of the battery, corresponding to the "heart" of the battery. It is divided into positive plate and negative plate.

2, the role of estrangement is to isolate positive plates and negative plates and avoid short circuits, which can be called "third electrodes". As an electrolyte carrier, it absorbs a small amount of electrolyte and acts as an ionic dispersion (ion conduction). With regard to the sealed Panasonic valve controlled lead-acid battery, the separation device can also serve as a "channel" of oxygen on the positive plate to reach the negative plate, so that the plate can successfully set up the oxygen cycle and increase the loss of water. The key to completing the maintenance free operation of diaphragm battery is to use ultrafine glass fiber.

3. the electrolyte consists of pure water and sulfuric acid and mixed with some additives.

The secondary effects of electrolyte are two aspects: one is to participate in electrochemical reaction, the other is one of the active substances of the battery; the two is to carry on the conductive effect, and use the transfer ion of the battery to conduct electricity in the electrolyte, so that the chemical reaction can be stopped smoothly.

4. the safety valve is one of the key components of the shallow lead acid battery, located on the top of the battery. It plays a role in four aspects:

(1) safety valve function, that is, when the battery pressure in the process of battery operation reaches the safety valve pressure, the valve is released to release pressure to avoid occurrence.

(2) sealing use: when the external pressure of the battery is lower than the valve closed pressure of the valve, the safety valve is closed, avoiding the leakage of the external air mist, and avoiding the air entering the Panasonic battery and forming a bad effect.

(3) ensure the normal external pressure of the maintenance free lead-acid battery, promote oxygen mixing in the battery and prevent water loss.

(4) explosion-proof, some safety valves are equipped with acid proof and explosion-proof membrane.

In addition, there are many types of safety valve structures, such as hats and umbrellas. Usually, the hat type made of rubber has better elasticity. The structure is complex, the incidence of the disease is low and the use is common.
Guangdong's shallow storage battery factory has strict production regulations, and a strict production attitude will produce a good quality shallow storage battery.